Your best option for a second channel that matches the channel included with Titan Lunette Ring # T4840500 is actually from Demco. It is # DM59602. I have linked a video review of this channel for you. view full answer...
If you are replacing your current lunette ring, you will need to check on 2 measurements to make sure a coupler will fit your channel. First will be the width and second will be the hole spacing.
As an example, the Demco Trailer Coupler - Adjustable Channel Mount # DM12688-95 will fit a 3" wide channel and will have 2" hole spacing when measured center to center. This is also designed for the use with a 2" ball and will have a 10,000 max capacity. Odds are this will match what you have... view full answer...
The correct replacement ball for a Curt Pintle Hook Combo, # C48200, with a 2-5/16 inch ball is the Pintle Hitch Ball, # C48830.
The Tow Ready Ball, # 63019, fits pintle hitch # TR63042.
If you were towing a trailer with a lunette ring, you would not remove the ball. The ball is what retains the ring and the top part of the pintle hitch keeps it from jumping up and off of the ball. view full answer...
To replace the piece that secures a lunette ring (for a pintle hook connection) on the Gen-Y Phantom X Adjustable 2-Ball Mount # GY45XR you need the Replacement Pintle Lock # 325-GH-032. view full answer...
I can certainly point you in the right direction, but I am not able to reference a VIN and see specifications on your Interstate trailer. If only it were so easy, right?
For a Lunette ring we have the channel mount # 337B16140 or a bolt on style # C48550. Both of these are rated for over 20,00 lbs and would be more than enough for your interstate trailer.
We also have the ramp springs # RS16933RH for the right hand side, and # RS16933LH for the left side. These are 2K torque ramp springs... view full answer...
To replace the chain hanger hooks on your Curt SecureLatch Pintle Hook # CU87FR you just need the Safety Chain Holder Hooks # C33VV. view full answer...